[Az-Geocaching] Magellan Gold
Robert & Linda Smith
listserv@azgeocaching.com
Sat, 03 Jul 2004 13:14:13 -0700
Yes, yes, it was working just as you had it. You know how it is, OH
there is an upgrade on the web site, I better try it out. What ever it
is not doing is my fault, not to worry. I will take take of what ever
it is, if I can find it.
Thank you for your concern and I will try the notes you have made here.
Bob Smith
SquishyGecko wrote:
> Bob -
>
> Oh no! Please tell me that the GPSr at least worked for a short time!
>
> Here's what I could find that might help. There is more information
> at
> http://www.mtgc.org/robertlipe/MeridianFAQ/#23.How%20do%20I%20actually%20use%20my%20Magellan%20GPS?|outline
>
>
> Good luck!
>
> Below are the recovery instructions for a dead MAP330 or Meridian.
> They are written for the MAP330 but they work just as well for the
> Meridians.
>
> *
>
> If your MAP330/Meridian is in a "locked up" state (stuck on),
> power it down by holding down MARK/GOTO and the ESC keys and press
> ENTER. This will power down the unit.
> *
>
> Power it up in "Software upload mode" by holding down MARK/GOTO
> and the ESC keys and press POWER. Unit should power up with a
> "software upload mode active" message.
> *
>
> Run magup.exe, select NO at the dialog box. Click on "Expert"
> and checkmark "On" for the "Expert Upload" setting (Be sure set the
> "Unit Type". Use Meridian GPS for the green/yellow or Meridian for the
> others. With the latest MagUp there is also a Meridian Marine and
> Meridian Color option) and click "OK"
> *
>
> Select the firmware file by clicking on "File" then "Select Code
> File". The firmware file should have a name like MGPS402.HEX or
> MGOLD406.HEX.
> *
>
> Click on "Upload" and click "OK". Checkmark "Program Code Only".
> Check "Upload File".
>
> You may be able to recover your unit back without sending it in. Make
> sure you put fresh batteries in before trying the above.
>
> If the above fails, try inserting step 1b between steps 1 and 2 as
> follows:
>
> *
>
> Erase the base map by Press NAV and GOTO simultaneously while
> switching on the Meridian. A small rectangle appears, put in the
> number 95 (using the cursor keys) and press ENTER. Select Yes and
> press ENTER. This will delete the basemap! The unit will also switch
> off automatically.
>
>
> Robert & Linda Smith wrote:
>
>> Anyone out there & SquishyGecko,
>>
>> I bought Squshies Magellan Gold GPS and stayed up till 0130 last
>> night reading and loading software on my lap top. At one point I
>> thought I was up loading a software upgrade to the GPS that I got off
>> the Magellan web site. The GPS screen said something like "software
>> uploading .... X" Than I was to turn it off and back on ..... there
>> in lies the problem. I can not get any kind of display on the screen
>> at all. I found a note in the CD manual that said to hold down the
>> "Menu" key and then the "Pwr" key and it should come on. It's not
>> happening, anyone have any ideas. My wife says "Youv'e KILLED the
>> GPS!!"
>>
>> Bob Smith, Petite Elite
>>
>>
>> ____________________________________________________________
>> Az-Geocaching mailing list listserv@azgeocaching.com
>> To edit your setting, subscribe or unsubscribe visit:
>> http://listserv.azgeocaching.com/mailman/listinfo/az-geocaching
>>
>> Arizona's Geocaching Resource
>> http://www.azgeocaching.com
>>
> ____________________________________________________________
> Az-Geocaching mailing list listserv@azgeocaching.com
> To edit your setting, subscribe or unsubscribe visit:
> http://listserv.azgeocaching.com/mailman/listinfo/az-geocaching
>
> Arizona's Geocaching Resource
> http://www.azgeocaching.com
>